{"title":"Enduro Bearings","description":"\u003cp class=\"p1\"\u003eEnduro Bearings specializes in high-quality bearings designed to handle the demands of cycling. With precision engineering and advanced materials, Enduro delivers smooth performance and durability across hubs, bottom brackets, and suspension pivots. Trusted by riders and manufacturers alike, Enduro Bearings keep bikes running silently and efficiently.\u003c\/p\u003e","products":[{"product_id":"bearings-3803-wide-10mm","title":"Enduro 3803 LLB W Bearing","description":"\u003cp\u003eExtra-Wide, Double-Row, ABEC-3, Radial Bearing with 52100 high-Carbon Chromium alloy races paired with grade 10 Balls. This bearing is assessed by Industry Nine in their rear hubs, and by Trek and Niner bike as a suspension pivot. The extra-wide double-row design greatly reduces flex in the axle of the rear hub or suspension linkage, while precisely filling the same space as two 6803 single-row bearings. This ABEC-3 bearing features deep-groove design races, with Grade 10 balls, LLB seals and 90% fill with high pressure water proof grease to withstand daily abuse of use and the elements.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe Enduro line of bearings are available in high-carbon chromium steel, 440C stainless steel, ceramic-hybrid and XD-15 with ceramic or stainless balls. Our bearings are always engineered with deepest groove races possible to accommodate the largest balls and feature dual-lip seals that ride in a micro-groove creating a full labyrinth to provide superior protection against the elements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBearing Specifications:\u003c\/strong\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eDouble row bearing\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eKnown to fit some Industry Nine rear hubs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eGrade 10 steel balls rated at ABEC 3 precision\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDual-lip labyrinth seals keep dirt out and grease in, even under extreme conditions\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePacked from the factory with the highest quality Rock ‘N’ Roll grease\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eStatic load: 62bf,.5N\u003c\/li\u003e\n\u003cli\u003eWeight: 5.5g\n\u003c\/li\u003e\n\u003cli\u003eSize: 17mm 26mm x 10mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e \u003cem\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Bearings may differ in colours and look.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eMODEL ID: \u003cstrong\u003e3803 LLB W\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Enduro","offers":[{"title":"Default Title","offer_id":40300120670256,"sku":"210000001452","price":35.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2969\/4180\/products\/EnduroBearings3803LLBW10mm_png.jpg?v=1656098501"},{"product_id":"enduro-6804-llu-max-bearing","title":"Enduro 6804 LLU MAX Bearing","description":"\u003cp\u003eEnduro Bearings pioneered MAX type bearings almost 20 years ago for bicycles to address the challenges associated with mountain bike pivots. MAX-type bearings provide 35-40% more load capacity than standard radial bearings by utilizing a special design where the maximum number of balls are inserted into the bearing, via a custom ground slot in the races. The additional balls, combined with deep race grooves in these bearings providing greater lateral support for the twisting and multi-directional forces associated with mountain bike pivots. This ABEC-3 bearing features deep-groove design races, with Grade 10 balls and full-contact, double-lip, labyrinth (LLU) seals for maximum protection against the elements, while keeping the 90% fill of Almagard extra high pressure grease inside.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe Enduro line of bearings are available in high-carbon chromium steel, 440C stainless steel, ceramic-hybrid and XD-15 with ceramic or stainless balls. Our bearings are always engineered with deepest groove races possible to accommodate the largest balls and feature dual-lip seals that ride in a micro-groove creating full labyrinth to provide long life and superior protection against the elements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eMAX are designed for use in suspension pivots\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHigh precision Grade 10 balls with ABEC 3 precision\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNo retainer means these bearings have 40 percent more static capacity\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFilled with Marine High Pressure grease\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLLU seals have two sealing lips on each seal\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eStatic load: 613bf,.72N\u003c\/li\u003e\n\u003cli\u003eWeight: 18.45g\u003c\/li\u003e\n\u003cli\u003eSize: 20mm x 32mm x 7mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBearings may differ in colours and look.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eMODEL ID: \u003cstrong\u003e6804 LLU MAX \u003c\/strong\u003e\u003c\/p\u003e","brand":"Enduro","offers":[{"title":"Default Title","offer_id":40300121260080,"sku":"210000001482","price":18.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2969\/4180\/products\/EnduroBearings6804LLUMAX7mm.jpg?v=1656101413"},{"product_id":"enduro-6903-llu-max-bearing","title":"Enduro 6903 LLU MAX Bearing","description":"\u003cp\u003eEnduro Bearings pioneered MAX type bearings almost 20 years ago for bicycles to address the challenges associated with mountain bike pivots. MAX-type bearings provide 35-40% more load capacity than standard radial bearings by utilizing a special design where the maximum number of balls are inserted into the bearing, via a custom ground slot in the races. The additional balls, combined with deep race grooves in these bearings provide greater lateral support for the twisting and multi-directional forces associated with mountain bike pivots. This ABEC-3 bearing features deep-groove design races, with grade 10 balls and full-contact, double-lip, labyrinth (LLU) seals for maximum protection against the elements, while keeping the 90% fill of Almagard extra high pressure grease inside.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe Enduro line of bearings are available in high-carbon chromium steel, 440C stainless steel, ceramic-hybrid and XD-15 with ceramic or stainless balls. Our bearings are always engineered with deepest groove races possible to accommodate the largest balls possible and feature dual-lip seals that ride in a micro-groove creating a full labyrinth to provide superior protection against the elements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eMAX are designed for use in suspension pivots\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHigh precision Grade 10 balls with ABEC 3 precision\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNo retainer means these bearings have 40 percent more static capacity\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFilled with Marine High Pressure grease\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLLU seals have two sealing lips on each seal\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eWeight: 17.59g\u003c\/li\u003e\n\u003cli\u003eSize: 17mm x 30mm x 7mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Bearings may differ in colours and look.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMODEL ID:  \u003cstrong\u003e6903 LLU MAX\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Enduro","offers":[{"title":"Default Title","offer_id":40300123029552,"sku":"210000001506","price":20.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2969\/4180\/products\/Enduro6903MAXBearing.jpg?v=1656095780"},{"product_id":"enduro-6803-llu-max-bearing","title":"Enduro 6803 LLU MAX Bearing","description":"\u003cp\u003e\u003cstrong\u003e6803 LLU MAX - MAX-Design ABEC-3 Radial Suspension Bearing\u003c\/strong\u003e - 17mm x 26mm x 5mm\u003c\/p\u003e\n\u003cp\u003eEnduro Bearings pioneered MAX type bearings almost 20 years ago for bicycles to address the challenges associated with mountain bike pivots. MAX-type bearings provide 35-40% more load capacity than standard radial bearings by utilizing a special design where the maximum number of balls are inserted into the bearing, via a custom ground slot in the races. The additional balls, combined with deep race grooves in these bearings providing greater lateral support for the twisting and multi-directional forces associated with mountain bike pivots. This MAX-type, Black-Oxide, ABEC-3 bearing features deep-groove design races, with Grade 10 balls and full-contact, double-lip, labyrinth (LLU) seals for maximum protection against the elements, while keeping the 90% fill of Almagard extra high pressure grease inside.\u003c\/p\u003e\n\u003cp\u003eThe Enduro line of bearings are available in high-carbon chromium steel, 440C stainless steel, ceramic-hybrid and XD-15 with ceramic or stainless balls. Our bearings are always engineered with deepest groove races possible to accommodate the largest balls possible. All of our standard bearings feature dual-lip seals that ride in a micro-groove creating a full labyrinth to provide superior protection against the elements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eMAX are designed for use in suspension pivots\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHigh precision Grade 10 balls with ABEC 3 precision\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNo retainer means these bearings have 40 percent more static capacity\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFilled with Marine High Pressure grease\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLLU seals have two sealing lips on each seal\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eStatic load: 442bf,.96N\u003c\/li\u003e\n\u003cli\u003eWeight: 7.72g\u003c\/li\u003e\n\u003cli\u003eSize: 17mm x 26mm x 5mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMODEL ID: \u003cstrong\u003e6803 LLU MAX\u003c\/strong\u003e\u003c\/p\u003e","brand":"Enduro","offers":[{"title":"Default Title","offer_id":40300123062320,"sku":"210000001478","price":14.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2969\/4180\/products\/EnduroBearings6803LLUMAX5mm2.jpg?v=1656099961"},{"product_id":"enduro-6902-bearing","title":"Enduro 6902 Bearing","description":"\u003cp\u003e\u003cstrong\u003e6902 LLB - ABEC-3 Radial Bearing\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(C3 clearance) - 15mm x 28mm x 7mm\u003c\/p\u003e\n\u003cp\u003eA radial bearing generally used as a hub bearing and can be used as a pivot bearing, though the MAX-type version of this bearing is better suited for suspension use. This ABEC-3 bearing features deep-groove design races, with Grade 10 balls, LLB seals and 90% fill with high pressure water proof grease to withstand daily abuse of use and the elements.\u003c\/p\u003e\n\u003cp\u003eThe Enduro line of bearings are available in high-carbon chromium steel, 440C stainless steel, ceramic-hybrid and XD-15 with ceramic or stainless balls. Our bearings are always engineered with deepest groove races possible to accommodate the largest balls possible and feature dual-lip seals that ride in a micro-groove creating a full labyrinth to provide superior protection against the elements.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e6900 Series: Commonly used in hubs, bottom brackets and certain suspension pivots\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGrade 10 steel balls rated at ABEC 3 precision\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDual-lip labyrinth seals keep dirt out and grease in, even under extreme conditions\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePacked from the factory with the highest quality Rock ‘N’ Roll grease\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eStatic load - 558lbf \/ 2.48kN\u003c\/li\u003e\n\u003cli\u003eWeight - 15.7g\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMODEL ID:\u003cstrong style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e 6902 LLB\u003c\/strong\u003e\u003c\/p\u003e","brand":"Enduro","offers":[{"title":"Default Title","offer_id":45331936837939,"sku":"210000001499","price":13.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2969\/4180\/files\/Enduro6902Bearing.png?v=1686173461"},{"product_id":"enduro-6903-bearing","title":"Enduro 6903 Bearing","description":"\u003cp\u003e\u003cstrong\u003e6903 LLB - ABEC-3 Radial Bearing\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(C3 clearance) - 17mm x 30mm x 7mm\u003c\/p\u003e\n\u003cp\u003eA radial bearing generally used as a hub bearing, as bottom bracket bearing for some older square taper BBs, and cane used as a pivot bearing, though the MAX-type version of this bearing is better suited for suspension use. This ABEC-3 bearing features deep-groove design races, with Grade 10 balls, LLB seals and 90% fill with high pressure water proof grease to withstand daily abuse of use and the elements.\u003c\/p\u003e\n\u003cp\u003eThe Enduro line of bearings are available in high-carbon chromium steel, 440C stainless steel, ceramic-hybrid andD-15 with ceramic or stainless balls. Our bearings are always engineered with deepest groove races possible to accommodate the largest balls and feature dual-lip seals that ride in a micro-groove creating full labyrinth to provide superior protection against the elements.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e6900 Series: Commonly used in hubs, bottom brackets and certain suspension pivots\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGrade 10 steel balls rated at ABEC 3 precision\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDual-lip labyrinth seals keep dirt out and grease in, even under extreme conditions\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePacked from the factory with the highest quality Rock ‘N’ Roll grease\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eStatic load - 573lbf \/ 2.55kN\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWeight - 17.1g\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eMODEL ID: \u003cstrong\u003e6903 LLB\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Enduro","offers":[{"title":"Default Title","offer_id":45331999883571,"sku":"210000001504","price":14.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2969\/4180\/files\/Enduro6903Bearing.png?v=1686174756"},{"product_id":"enduro-6802-bearing","title":"Enduro 6802 Bearing","description":"\u003cp\u003e\u003cstrong\u003e6802 LLB - ABEC-3 Radial Bearing\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(C3 clearance) - 15mm x 24mm x 5mm\u003c\/p\u003e\n\u003cp\u003eA radial bearing generally used as a hub bearing and has be used as a pivot bearing, though the MAX-type version of this bearing is better suited for suspension use. This ABEC-3 bearing features deep-groove design races, with Grade 10 balls, dual-lip labyrinth (LLB) seals to withstand daily abuse of use and the elements, and to contain the 90% fill Mobilux NGLI 2 high pressure water proof synthetic grease.\u003c\/p\u003e\n\u003cp\u003eThe Enduro line of bearings are available in high-carbon chromium steel, 440C stainless steel, ceramic-hybrid and XD-15 with ceramic or stainless balls. Our bearings are always engineered with deepest groove races possible to accommodate the largest balls and feature dual-lip seals that ride in a micro-groove creating a full labyrinth to provide superior protection against the elements.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e6800 Series: Commonly used in pedals, front hubs, bottom brackets, headsets and certain suspension pivots\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGrade 10 steel balls rated at ABEC 3 precision\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDual-lip labyrinth seals keep dirt out and grease in, even under extreme conditions\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePacked from the factory with the highest quality Rock ‘N’ Roll grease\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStatic load - 283lbf \/ 1.26kN\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWeight - 6.7g\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eMODEL ID:\u003cstrong\u003e 6802 LLB\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Enduro","offers":[{"title":"Default Title","offer_id":45332010533171,"sku":"210000001474","price":10.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2969\/4180\/files\/Enduro6802Bearing.png?v=1686175171"},{"product_id":"enduro-6803-bearing","title":"Enduro 6803 Bearing","description":"\u003cp\u003e\u003cstrong\u003e6803 LLB C3 - ABEC-3 Radial Bearing\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e- 17mm x 26mm x 5mm\u003c\/p\u003e\n\u003cp\u003eA radial bearing generally used as a hub bearing and has be used as a pivot bearing, though the MAX-type version of this bearings better suited for suspension use. This ABEC-3 bearing features deep-groove design races, with Grade 10 balls, dual-lip labyrinth (LLB) seals to withstand daily abuse of use and the elements, and to contain the 90% fill Mobilux NGLI 2 high pressure water proof synthetic grease.\u003c\/p\u003e\n\u003cp\u003eThe Enduro line of bearings are available in high-carbon chromium steel, 440C stainless steel, ceramic-hybrid and XD-15 with ceramic or stainless balls. Our bearings are always engineered with deepest groove races possible to accommodate the largest balls and feature dual-lip seals that ride in a micro-groove creating full labyrinth to provide long life and superior protection against the elements.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e6800 Series: Commonly used in pedals, front hubs, bottom brackets, headsets and certain suspension pivots\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGrade 10 steel balls rated at ABEC 3 precision\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDual-lip labyrinth seals keep dirt out and grease in, even under extreme conditions\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePacked from the factory with the highest quality Rock ‘N’ Roll grease\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStatic load - 308lbf \/ 1.37kN\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWeight - 7.3g\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eMODEL ID: \u003cstrong\u003e6803 LLB\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Enduro","offers":[{"title":"Default Title","offer_id":45332010598707,"sku":"210000001477","price":13.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2969\/4180\/files\/Enduro6803Bearing.png?v=1686176301"},{"product_id":"enduro-6900-max-bearing","title":"Enduro 6900 MAX Bearing","description":"\u003cp\u003e\u003cstrong\u003e6900 LLU MAX - MAX-Design ABEC-3 Radial Suspension Bearing\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- 10mm 22mm x 6mm\u003c\/p\u003e\n\u003cp\u003eEnduro bearings pioneered MAX type bearings over 20 years ago for bicycles to address the challenges associated with mountain bike pivots. These bearings have 35-40% more load capacity than standard radial bearings. We accomplish this with a special design where the maximum number of balls are inserted into the bearing, via a custom ground slot in the races. The additional balls, combined with deep race grooves in these bearings providing greater lateral support for the twisting and multi-directional forces associated with mountain bike pivots. This ABEC-3 bearing features deep-groove design races, with Grade 10 balls and full-contact, double-lip, labyrinth (LLU) seals for maximum protection against the elements, while keeping the 90% fill of Almagard extra high pressure grease inside.\u003c\/p\u003e\n\u003cp\u003eThis bearing has been used as a suspension pivot bearing by a number of bicycle brands including Santa Cruz, Transition and Rocky Mountain.\u003c\/p\u003e\n\u003cp\u003eThe Enduro line of bearings are available in high-carbon chromium steel, 440C stainless steel, ceramic-hybrid andD-15 with ceramic or stainless balls. Our bearings are always engineered with deepest groove races possible to accommodate the largest balls possible and feature dual-lip seals that ride in a micro-groove creating a full labyrinth to provide superior protection against the elements.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMAX are designed for use in suspension pivots\u003c\/li\u003e\n\u003cli\u003eHigh precision Grade 10 balls with ABEC 3 precision\u003c\/li\u003e\n\u003cli\u003eNo retainer means these bearings have 40 percent more static capacity\u003c\/li\u003e\n\u003cli\u003eFilled with Marine High Pressure grease\u003c\/li\u003e\n\u003cli\u003eLLU seals have two sealing lips on each seal\u003c\/li\u003e\n\u003cli\u003eStatic load - 477lbf \/ 2.12kN\u003c\/li\u003e\n\u003cli\u003eWeight - 9.45g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMODEL ID: \u003cstrong\u003e6900 LLU MAX\u003c\/strong\u003e\u003c\/p\u003e","brand":"Enduro","offers":[{"title":"Default Title","offer_id":45332010631475,"sku":"210000001495","price":15.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2969\/4180\/files\/Enduro6900MAXBearing.png?v=1686176824"},{"product_id":"090888-4","title":"Enduro 6806 Bearing","description":"\n\u003cp\u003e\u003cstrong\u003eEnduro 6806 LLB - ABEC-3 Radial Bearing\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(C3 Clearance) - 30mm x 42mm x 7mm \u003c\/p\u003e\n\u003cp\u003eABEC-3 Radial Bottom Bracket bearing featuring 52100 High-Carbon Chromium alloy races paired with grade 10 Balls with 90% fill, high-pressure, water-proof grease.\u003c\/p\u003e\n\u003cp\u003eThe most common use for this bearing is as a direct replacement bearing for BB30 and PF30 type BBs (including BB386).\u003c\/p\u003e\n\u003cp\u003eThe Enduro line of bearings are available in high-carbon chromium steel, 440C stainless steel, ceramic-hybrid and XD-15 with ceramic or stainless balls. Our bearings are always engineered with deepest groove races possible to accommodate the largest balls and feature dual-lip seals that ride in a micro-groove creating a full labyrinth to provide superior protection against the elements.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e6800 Series: Commonly used in pedals, front hubs, bottom brackets, headsets and certain suspension pivots\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGrade 10 steel balls rated at ABEC 3 precision\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDual-lip labyrinth seals keep dirt out and grease in, even under extreme conditions\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePacked from the factory with the highest quality Rock ‘N’ Roll grease\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStatic load - 854lbf \/ 3.8kN\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWeight - 24.7g\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eModel ID: \u003cstrong\u003e6806 LLB\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Enduro","offers":[{"title":"Default Title","offer_id":45332017611059,"sku":"210000001487","price":23.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2969\/4180\/files\/Enduro6806Bearing.png?v=1686177342"},{"product_id":"090887-4","title":"Enduro 6902 MAX Bearing","description":"\u003cp\u003e\u003cstrong\u003e6902 LLU MAX MAX-Design ABEC-3 Radial Suspension Bearing\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e- 15mm x 8mm x 5mm\u003c\/p\u003e\n\u003cp\u003eEnduro Bearings pioneered MAX type bearings over 20 years ago for bicycles to address the challenges associated with mountain bike pivots. MAX-type bearings provide 35-40% more load capacity than standard radial bearings by utilizing a special design where the maximum number of balls are inserted into the bearing, via a custom ground slot in the races. The additional balls, combined with deep race grooves in these bearings provide greater lateral support for the twisting and multi-directional forces associated with mountain bike pivots. This ABEC-3 bearing features deep-groove design races, with grade 10 balls and full-contact, double-lip, labyrinth (LLU) seals for maximum protection against the elements, while keeping the 90% fill of Almagard extra high pressure grease inside.\u003c\/p\u003e\n\u003cp\u003eThis bearing has been used as a suspension pivot bearing by a number of bicycle brands.\u003c\/p\u003e\n\u003cp\u003eThe Enduro line of bearings are available in high-carbon chromium steel, 440C stainless steel, ceramic-hybrid and XD-15 with ceramic or stainless balls. Our bearings are always engineered with deepest groove races possible to accommodate the largest balls possible and feature dual-lip seals that ride in a micro-groove creating a full labyrinth to provide superior protection against the elements.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eMAX are designed for use in suspension pivots\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHigh precision Grade 10 balls with ABEC 3 precision\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNo retainer means these bearings have 40 percent more static capacity\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFilled with Marine High Pressure grease\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLLU seals have two sealing lips on each seal\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStatic load - 812lbf \/ 3.61kN\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWeight - 15.85g\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eMODEL ID:  \u003cstrong\u003e6902 LLU MAX\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Enduro","offers":[{"title":"Default Title","offer_id":45332028784947,"sku":"210000001501","price":17.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2969\/4180\/files\/Enduro6902MAXBearing.png?v=1686177658"},{"product_id":"090887-5","title":"Enduro 6801 MAX Bearing","description":"\u003cp\u003e\u003cstrong\u003e6801 LLU MAX - MAX-Design ABEC-3 Radial Suspension Bearing\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- 12mm x 21mm x 5mm\u003c\/p\u003e\n\u003cp\u003eEnduro Bearings pioneered MAX type bearings almost 20 years ago for bicycles to address the challenges associated with mountain bike pivots. MAX-type bearings provide 35-40% more load capacity than standard radial bearings by utilizing a special design where the maximum number of balls are inserted into the bearing, via a custom ground slot in the races. The additional balls, combined with deep race grooves in these bearings providing greater lateral support for the twisting and multi-directional forces associated with mountain bike pivots. This ABEC-3 bearing features deep-groove design races, with Grade 10 balls and full-contact, double-lip, labyrinth (LLU) seals for maximum protection against the elements, while keeping the 90% fill of Almagard extra high pressure grease inside.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eMAX are designed for use in suspension pivots\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHigh precision Grade 10 balls with ABEC 3 precision\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNo retainer means these bearings have 40 percent more static capacity\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFilled with Marine High Pressure grease\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLLU seals have two sealing lips on each seal\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStatic load - 409lbf \/ 1.82kN\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWeight - 5.8g\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eMODEL ID: \u003cstrong\u003e6801 LLU MAX\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Enduro","offers":[{"title":"Default Title","offer_id":45453488587059,"sku":"210000001473","price":12.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2969\/4180\/files\/Bearings6801MAX.jpg?v=1687284584"},{"product_id":"090887-6","title":"Enduro 6802 MAX Bearing","description":"\u003cp\u003e\u003cstrong\u003e6802 LLU MAX - MAX-Design ABEC-3 Radial Suspension Bearing\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- 15mm x 24mm x 5mm \u003c\/p\u003e\n\u003cp\u003eEnduro Bearings pioneered MAX type bearings over 20 years ago for bicycles to address the challenges associated with mountain bike pivots. MAX-type bearings provide 35-40% more load capacity than standard radial bearings by utilizing a special design where the maximum number of balls are inserted into the bearing, via a custom ground slot in the races. The additional balls, combined with deep race grooves in these bearings providing greater lateral support for the twisting and multi-directional forces associated with mountain bike pivots. This ABEC-3 bearing features deep-groove design races, with Grade 10 balls and full-contact, double-lip, labyrinth (LLU) seals for maximum protection against the elements, while keeping the 90% fill of Almagard extra high pressure grease inside.\u003c\/p\u003e\n\u003cp\u003eThis bearing has been used as a suspension pivot bearing by a number of bicycle brands.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eMAX are designed for use in suspension pivots\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHigh precision Grade 10 balls with ABEC 3 precision\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNo retainer means these bearings have 40 percent more static capacity\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFilled with Marine High Pressure grease\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLLU seals have two sealing lips on each seal\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStatic load - 486lbf \/ 2.16kN\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWeight - 6.83g\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eMODEL ID: \u003cstrong\u003e6802 LLU MAX\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Enduro","offers":[{"title":"Default Title","offer_id":45453489471795,"sku":"210000001475","price":12.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2969\/4180\/files\/Enduro6802MAXBearing.jpg?v=1687285919"},{"product_id":"090888-5","title":"Enduro 6804 Bearing","description":"\u003cstrong\u003e6804 LLB ABEC-3 Radial Bearing \u003c\/strong\u003e- 20mm x 32mm x 7mm\n\u003cp\u003eRadial bearing generally used as a front hub bearing and has be used as a pivot bearing, though the MAX-type version of this bearing is better suited for suspension use. This ABEC-3 bearing features deep-groove design races, with Grade 10 balls, dual-lip labyrinth (LLB) seals to withstand daily abuse of use and the elements, and to contain the 90% fill Mobilux NGLI 2 high pressure water proof synthetic grease.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e6800 Series: Commonly used in pedals, front hubs, bottom brackets, headsets and certain suspension pivots\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGrade 10 steel balls rated at ABEC 3 precision\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDual-lip labyrinth seals keep dirt out and grease in, even under extreme conditions\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePacked from the factory with the highest quality Rock ‘N’ Roll grease\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStatic load - 501lbf \/ 2.23kN\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWeight - 17.2g\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eMODEL ID:  \u003cstrong\u003e6804 LLB\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Enduro","offers":[{"title":"Default Title","offer_id":45453492945203,"sku":"210000001480","price":16.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2969\/4180\/files\/Enduro6804Bearing.jpg?v=1687286625"},{"product_id":"090887-7","title":"Enduro 6901 MAX Bearing","description":"\u003cp\u003e\u003cstrong\u003e6901 LLU MAX - MAX-Design ABEC-3 Radial Suspension Bearing\u003c\/strong\u003e - 12mm 24mm x 6mm \u003c\/p\u003e\n\u003cp\u003eEnduro bearings pioneered MAX type bearings over 20 years ago for bicycles to address the challenges associated with mountain bike pivots. These bearings have 35-40% more load capacity than standard radial bearings. We accomplish this with a special design where the maximum number of balls are inserted into the bearing, via a custom ground slot in the races. The additional balls, combined with deep race grooves in these bearings providing greater lateral support for the twisting and multi-directional forces associated with mountain bike pivots. This ABEC-3 bearing features deep-groove design races, with Grade 10 balls and full-contact, double-lip, labyrinth (LLU) seals for maximum protection against the elements, while keeping the 90% fill of Almagard extra high pressure grease inside.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eMAX are designed for use in suspension pivots\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHigh precision Grade 10 balls with ABEC 3 precision\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNo retainer means these bearings have 40 percent more static capacity\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFilled with Marine High Pressure grease\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLLU seals have two sealing lips on each seal\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStatic load - 560lbf \/ 2.49kN\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWeight - 10.88g\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eMODEL ID: \u003cstrong\u003e6901 LLU MAX\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Enduro","offers":[{"title":"Default Title","offer_id":45453493010739,"sku":"210000001498","price":18.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2969\/4180\/files\/Enduro6901MAXBearing.jpg?v=1687287368"},{"product_id":"enduro-abec-3-mr2437-external-bb-bearing","title":"Enduro ABEC-3 MR2437 (External BB Bearing)","description":"\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003eMR 2437 LLB - ABEC-3 Radial Bearing\u003c\/strong\u003e - 24mm x 37mm x 7mm\u003c\/p\u003e\n\u003cp\u003eABEC-3 Radial Bottom Bracket Bearing featuring Black-Oxide treated 52100 High-Carbon Chromium alloy races paired with grade 10 Balls with 90% fill, Mobil XHP 222 high-pressure, water-proof grease.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe most common use for this bearing is as a direct replacement bearing for Shimano-type external cup BBs and cranksets with 24mm spindles.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eGrade 10 steel balls rated at ABEC 3 precision\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDual-lip labyrinth seals keep dirt out and grease in, even under extreme conditions\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePacked from the factory with the highest quality Rock ‘N’ Roll grease\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFits 24mm external BB cups (both sides: Shimano, RaceFace)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAlso fits drive-side SRAM external BB cup\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStatic load - 773lbf \/ 3.34kN\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWeight - 31g\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eMODEL ID:  \u003cstrong\u003eMR 2437 LLB\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Enduro","offers":[{"title":"Default Title","offer_id":45453493076275,"sku":"210000001528","price":16.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2969\/4180\/files\/EnduroABEC-3MR2437_externalBBBearing.jpg?v=1687287766"},{"product_id":"090887-8","title":"Enduro 6001 MAX ABEC-3 Bearing","description":"\u003cp\u003e\u003cstrong\u003e6001 LLU MAX - MAX-Design, ABEC-3 Radial Suspension Bearing\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e- 12mm x 28mm x 8mm \u003c\/p\u003e\n\u003cp\u003eEnduro Bearings pioneered MAX type bearings over 20 years ago for bicycles to address the challenges associated with mountain bike pivots. MAX-type bearings provide 35-40% more load capacity than standard radial bearings by utilizing a special design where the maximum number of balls are inserted into the bearing, via a custom ground slot in the races. The additional balls, combined with deep race grooves in these bearings providing greater lateral support for the twisting and multi-directional forces associated with mountain bike pivots. This ABEC-3 bearing features deep-groove design races, with Grade 10 balls and full-contact, double-lip, labyrinth (LLU) seals for maximum protection against the elements, while keeping the 90% fill of Almagard extra high pressure grease inside.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eMAX are designed for use in suspension pivots\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHigh precision Grade 10 balls with ABEC 3 precision\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNo retainer means these bearings have 40 percent more static capacity\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFilled with Marine High Pressure grease\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLLU seals have two sealing lips on each seal\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStatic load - 863lbf \/ 3.84kN\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWeight - 20.8g\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eMODEL ID:  \u003cstrong\u003e6001 LLU MAX\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Enduro","offers":[{"title":"Default Title","offer_id":45453641842995,"sku":"210000001458","price":12.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2969\/4180\/files\/Bearings6001MAX.jpg?v=1687290261"},{"product_id":"090888-7","title":"Enduro MR-15267 A3 Bearing 2RS","description":"\u003cp\u003e\u003cstrong\u003eMR 15267LB - ABEC-3 Radial Bearing\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(C3 clearance) - 15mm x 26mm x 7mm \u003c\/p\u003e\n\u003cp\u003eA radial bearing generally used as a hub bearing and can be used as a pivot bearing, though the MAX-type version of this bearing is better suited for suspension use. This ABEC-3 bearing features deep-groove design races, with Grade 10 balls, light-contact, dual-lip, labyrinth (LLB) seals and 90% fill with high pressure water proof grease to withstand daily abuse of use and the elements.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eGrade 10 steel balls rated at ABEC 3 precision\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDual-lip labyrinth seals keep dirt out and grease in, even under extreme conditions\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePacked from the factory with the highest quality Rock ‘N’ Roll grease\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStatic load - 375lbf \/ 1.67kN\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWeight - 11.2g\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eMODEL ID:  \u003cstrong\u003eMR 15267 LLB\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Enduro","offers":[{"title":"Default Title","offer_id":45454304051507,"sku":"210000001521","price":14.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2969\/4180\/files\/EnduroMR-15267A3Bearing2RS7mm.jpg?v=1687291857"},{"product_id":"enduro-mr-15307-abec-5-steel-bearing-llb-llu-cn-each-15x30x7mm","title":"Enduro MR 15307 LLU\/LLB CN - ABEC-5 Radial Bearing","description":"\u003cp\u003e\u003cstrong\u003eMR 15307 LLU\/LLB CN - ABEC-5 Radial Bearing \u003c\/strong\u003e(CN Clearance) - 15mm x 30mm x 7mm -\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eA radial bearing used as a rear hub bearing in Industry Nine hubs. This ABEC-5 bearing features deep-groove design 52100 High-Carbon Chromium alloy races, with grade 10 balls, dual-lip, full-contact LLU seals facing outwards to withstand daily abuse of use and the elements, and lighter-contact LLB seals facing inwards to contain the 90% fill with Mobil XHP 222 high pressure water proof grease. CN clearance specification is best for loose press-fit bearing bores.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eKnown to be used on some I9 hubs.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eMODEL ID:  \u003cstrong\u003eMR 15307 LLU\/LLB A5 CN\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Enduro","offers":[{"title":"Default Title","offer_id":45454304149811,"sku":"210000042416","price":18.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2969\/4180\/files\/MR15307LLU_LLBCN-ABEC-5_RadialBearing.jpg?v=1687292047"},{"product_id":"090887-9","title":"Enduro 608 MAX Bearing","description":"\u003cp\u003e\u003cstrong\u003e608 LLU MAX - MAX-Design ABEC-3 Radial Suspension Bearing\u003c\/strong\u003e - 18mm x 22mm x 7mm\u003c\/p\u003e\n\u003cp\u003eEnduro Bearings pioneered MAX type bearings almost 20 years ago for bicycles to address the challenges associated with mountain bike pivots. MAX-type bearings provide 35-40% more load capacity than standard radial bearings by utilizing a special design where the maximum number of balls are inserted into the bearing, via a custom ground slot in the races. The additional balls, combined with deep race grooves in these bearings providing greater lateral support for the twisting and multi-directional forces associated with mountain bike pivots. This ABEC-3 bearing features deep-groove design races, with Grade 10 balls and full-contact, double-lip, labyrinth (LLU) seals for maximum protection against the elements, while keeping the 90% fill of Almagard extra high pressure grease inside.\u003c\/p\u003e\n\u003cp\u003eThis bearing has been used as a suspension pivot bearing by a number of bicycle brands.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMAX are designed for use in suspension pivots\u003c\/li\u003e\n\u003cli\u003eHigh precision Grade 10 balls with ABEC 3 precision\u003c\/li\u003e\n\u003cli\u003eNo retainer means these bearings have 40 percent more static capacity\u003c\/li\u003e\n\u003cli\u003eFilled with Marine High Pressure grease\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLLU seals have two sealing lips on each seal\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStatic load - 483lbf \/ 2.18kN\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWeight - 11.55g\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eMODEL ID:  \u003cstrong\u003e608 LLU MAX\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Enduro","offers":[{"title":"Default Title","offer_id":45454312538419,"sku":"210000001445","price":10.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2969\/4180\/files\/Enduro608MAXBearing.jpg?v=1687292502"},{"product_id":"enduro-t47-bottom-bracket-shimano","title":"Enduro T47-Asymmetrical Shimano-type (24mm) Bottom Bracket","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eCompatible with: R5CX, Soloist\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBKSR-0216 - T47-Asymmetrical, Thread-In, 440C Stainless Steel, Radial Bearing Bottom Bracket for Shimano-type (24mm) spindles.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e440C stainless steel bearings pressed into precision machined aluminum T47 cups that simply thread directly into the BB shell.\u003c\/p\u003e\n\u003cp\u003eThe T47A (Asymmetrical) specification is a new thread-in standard that has is similar in concept to BBRight (but with threads) that been used by a couple brands, including Cervelo and Factor.\u003c\/p\u003e\n\u003cp\u003eAll Enduro bottom brackets are manufactured to the highest standards at the Enduro Bearings production facility in California, USA. This complete bottom bracket features Angular Contact, 440C stainless steel balls and races to provide long life and superior corrosion resistance in applications and environments that may be less than ideal. Though stainless steel has 20% less load capacity and is slightly softer than our standard 52100 chromium steel used in most of our bearings, stainless steel is an excellent alternative for use in wet conditions, if you wash your bike often, or where sweat can be a problem. Enduro Bearings also uses LLB type seals and CRC Marine Grease in these bearings to additionally water proof against the elements. We are so confident in the quality and performance of theses bearings, Enduro provides a three year anti-corrosion guarantee.\u003c\/p\u003e\n\u003cp\u003eFinding the right bottom bracket solution for the ever-growing range of bicycles on the market is not always an easy task. At Enduro we currently offer over 50 different models of bottom brackets for various bottom bracket shell and crankset combinations in multiple price\/performance levels. Enduro bearings offers threaded options for BSA, BSA 30, Italian and the robust T47 system. For press-fit bottom brackets we created the oft-copied, thread-together Torqtite bottom brackets as well as press-fit Delrin Cup options. We even offer flanged, double-row bearings to fit 30mm cranksets in BB86 shells!\u003c\/p\u003e","brand":"Cervelo","offers":[{"title":"Default Title","offer_id":50799990112563,"sku":"210000088278","price":199.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2969\/4180\/files\/EnduroT47BottomBracketShimano.jpg?v=1734556658"},{"product_id":"enduro-cxd-6902-llb-xd15-ceramic-hybrid-abec-5-radial-bearing","title":"Enduro CXD 6902 LLB - XD15 Ceramic-Hybrid ABEC-5 Radial Bearing","description":"\u003cp\u003e\u003cstrong\u003eCXD 6902 LLB - XD15 Ceramic-Hybrid ABEC-5 Radial Bearing\u003c\/strong\u003e (CN clearance) - 15mm x 28mm x 7mm\u003c\/p\u003e\n\u003cp\u003eThe ultimate upgrade\u003cbr\u003eAn Enduro Bearings exclusive, our XD15 Ceramic-Hybrid bearings combine corrosion-proof, cryogenically treated nitrogen steel races with Silicon Nitride Grade 5 ceramic balls in a proprietary process that results in the ultimate high performance bearing setup. The deep-groove design raceways allow for maximum sized Grade 5 Silicon Nitride ceramic balls for for increased contact area and improved performance and longevity. Dual-lip labyrinth (LLB) seals protect from the elements, and contain the 90% fill Kluber NBU52 grease that runs smoother with time and is highly resistant to being washed out.\u003c\/p\u003e\n\u003cp\u003eThe most impressive feature of XD15 ceramic-hybrid bearings is, unlike other bearings, they only get better with time and use. As the bearings wear-in, the super-hard ceramic balls actually make the XD15 races even smoother. So, when compared to other ceramic-hybrid bearings on the market that claim speed and power advantages on day one, Enduro XD15 bearings not only provide the same initial advantages on day one, but will become faster and smoother with time and use, while the other ceramic-hybrid options will only get slower. We are so confident in the performance of XD15 Ceramic-Hybrid bearings that they carry a limited lifetime warranty against wear and corrosion.\u003c\/p\u003e\n\u003cp\u003eThis size bearing is single most common size used for modern though-axle hubs.\u003c\/p\u003e\n\u003cp\u003eThe Enduro line of bearings are available in high-carbon chromium steel, 440C stainless steel, ceramic-hybrid and XD15 with ceramic or stainless balls. Our bearings are always engineered with deepest groove races possible to accommodate the largest balls possible and feature dual-lip seals that ride in a micro-groove creating a full labyrinth to provide superior protection against the elements.\u003c\/p\u003e\n\u003cp\u003eStatic load - 558lbf \/ 2.48kN\u003cbr\u003eWeight - 13.87g\u003c\/p\u003e\n\u003cp\u003eMODEL ID: \u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eCXD 6902 LLB\u003c\/strong\u003e\u003c\/p\u003e","brand":"Enduro","offers":[{"title":"Default Title","offer_id":51656646787379,"sku":"210000033833","price":129.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2969\/4180\/files\/CXD6902LLB.jpg?v=1750010198"},{"product_id":"enduro-cxd-6802-llb-xd15-ceramic-hybrid-abec-5-radial-bearing","title":"Enduro CXD 6802 LLB - XD15 Ceramic-Hybrid ABEC-5 Radial Bearing","description":"\u003cp\u003e\u003cstrong\u003eCXD 6802 LLB - XD15 Ceramic-Hybrid ABEC-5 Radial Bearing\u003c\/strong\u003e (CN clearance) - 15mm x 24mm x 5mm \u003c\/p\u003e\n\u003cp\u003eThe ultimate upgrade\u003cbr\u003eAn Enduro Bearings exclusive, our XD15 Ceramic-Hybrid bearings combine corrosion-proof, cryogenically treated nitrogen steel races with Silicon Nitride Grade 5 ceramic balls in a proprietary process that results in the ultimate high performance bearing setup. The deep-groove design raceways allow for maximum sized Grade 5 Silicon Nitride ceramic balls for for increased contact area and improved performance and longevity. Dual-lip labyrinth (LLB) seals protect from the elements, and contain the 90% fill Kluber NBU52 grease that runs smoother with time and is highly resistant to being washed out.\u003c\/p\u003e\n\u003cp\u003eThe most impressive feature of XD15 ceramic-hybrid bearings is, unlike other bearings, they only get better with time and use. As the bearings wear-in, the super-hard ceramic balls actually make the XD15 races even smoother. So, when compared to other ceramic-hybrid bearings on the market that claim speed and power advantages on day one, Enduro XD15 bearings not only provide the same initial advantages on day one, but will become faster and smoother with time and use, while the other ceramic-hybrid options will only get slower. We are so confident in the performance of XD15 Ceramic-Hybrid bearings that they carry a limited lifetime warranty against wear and corrosion.\u003c\/p\u003e\n\u003cp\u003eThis size bearing is used primarily in hubs, square-taper BBs and pedals.\u003c\/p\u003e\n\u003cp\u003eThe Enduro line of bearings are available in high-carbon chromium steel, 440C stainless steel, ceramic-hybrid and XD15 with ceramic or stainless balls. Our bearings are always engineered with deepest groove races possible to accommodate the largest balls and feature dual-lip seals that ride in a micro-groove creating full labyrinth to provide long life and superior protection against the elements.\u003c\/p\u003e\n\u003cp\u003eStatic load - 283lbf \/ 1.26kN\u003cbr\u003eWeight - 6.38g\u003c\/p\u003e\n\u003cp\u003eMODEL ID: \u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eCXD 6802 LLB\u003c\/strong\u003e\u003c\/p\u003e","brand":"Enduro","offers":[{"title":"Default Title","offer_id":51656646852915,"sku":"210000033832","price":163.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2969\/4180\/files\/CXD6802LLB.jpg?v=1750010022"},{"product_id":"enduro-cxd-mr-15267-llb-xd15-ceramic-hybrid-abec-5-radial-bearing","title":"Enduro CXD MR 15267 LLB - XD15 Ceramic-Hybrid ABEC-5 Radial Bearing","description":"\u003cp\u003e\u003cstrong\u003eCXD MR 15267 LLB - XD15 Ceramic-Hybrid ABEC-5 Radial Bearing\u003c\/strong\u003e (CN clearance) - 15mm x 26mm x 7mm\u003c\/p\u003e\n\u003cp\u003eThe ultimate upgrade\u003cbr\u003eAn Enduro Bearings exclusive, our XD15 Ceramic-Hybrid bearings combine corrosion-proof, cryogenically treated nitrogen steel races with Silicon Nitride Grade 5 ceramic balls in a proprietary process that results in the ultimate high performance bearing setup. The deep-groove design raceways allow for maximum sized Grade 5 Silicon Nitride ceramic balls for for increased contact area and improved performance and longevity. Dual-lip labyrinth (LLB) seals protect from the elements, and contain the 90% fill Kluber NBU52 grease that runs smoother with time and is highly resistant to being washed out.\u003c\/p\u003e\n\u003cp\u003eThe most impressive feature of XD15 ceramic-hybrid bearings is, unlike other bearings, they only get better with time and use. As the bearings wear-in, the super-hard ceramic balls actually make the XD15 races even smoother. So, when compared to other ceramic-hybrid bearings on the market that claim speed and power advantages on day one, Enduro XD15 bearings not only provide the same initial advantages on day one, but will become faster and smoother with time and use, while the other ceramic-hybrid options will only get slower. We are so confident in the performance of XD15 Ceramic-Hybrid bearings that they carry a limited lifetime warranty against wear and corrosion.\u003c\/p\u003e\n\u003cp\u003eThis size bearing is used primarily in hubs.\u003c\/p\u003e\n\u003cp\u003eThe Enduro line of bearings are available in high-carbon chromium steel, 440C stainless steel, ceramic-hybrid and XD15 with ceramic or stainless balls. Our bearings are always engineered with deepest groove races possible to accommodate the largest balls possible and feature dual-lip seals that ride in a micro-groove creating a full labyrinth to provide superior protection against the elements.\u003c\/p\u003e\n\u003cp\u003eStatic load - 375lbf \/ 1.67kN\u003cbr\u003eWeight - 11.19g\u003c\/p\u003e\n\u003cp\u003eMODEL ID: \u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eCXD MR 15267 LLB\u003c\/strong\u003e\u003c\/p\u003e","brand":"Enduro","offers":[{"title":"Default Title","offer_id":51656646885683,"sku":"210000044515","price":164.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2969\/4180\/files\/EnduroMR15267XD-15CeramicBearing.jpg?v=1750007189"}],"url":"https:\/\/staedcycles.com\/collections\/enduro-bearings-1.oembed","provider":"Steed Cycles","version":"1.0","type":"link"}